Remote start not working on evo one with THAR-ONE-HON5 T harness and 942rf kit

Question

I initially was able to successfully connect my EVO one to my 2009 honda accord with the HON5 T harness. The OEM key fob worked fine starting the car (I programmed it to lock, unlock, and lock), then I went to install and pair the 942 RF kit. After pairing the 2 remotes, it was able to lock and unlock the car just fine, but when I pressed the (+) button twice to check the status of the car, it gave me the wrong status beeps (it was telling me the car was unlocked when it was actually locked). Next I tried remote starting from the 942 remotes and it wouldn't start, it would give me the green confirmation saying that it started, and then later beep/flash red that it failed to start 3 seconds later. Then i tried using the OEM fob to start (which previously worked) but didn't work as well.

Both the module and antenna are up to date. I tried fixing it by reflashing the evo one with the same settings I used in the beginning, and reconnected it to the car. I made sure all the connections were intact (including ground), and even tried reprogramming the module to the car, which seemed to be successful according to the light sequences outlined in the installation guide. Still not working after this. I also tried the master reset (https://12voltdoesit.com/uploads/docs/Fortin/EVO-ONEMasterReset.pdf - *I used the bypass side*), which didn't do anything. I removed all the connections for now while trying to resolve the issue.

S/N: 002B04 747360