2017 Tuscon push start issues

Question

Installed evo one with t-harness, tried to program and unit doesn't seem to work.  No to start or stop the engine,

I need to press start/stop two times?  Any suggestions or help would be appreciated.  without hood pin, A11 should be on or off? Only wire that i had to splice was the lift gate wire...

Answer 1

Hello,

What is the S/N number on the back of the module?

Thank you.

Comments

002B04 647623

---

You need to enable option 38.2 in the remote starter for 3x lock to function.

Best regards.

---

got remote start to start car, but it only runs for about 15-20 seconds then shuts off and the headlights flash 3 times.  on the unit when it starts the unit shows a red and ornage/yellow light then shuts ff after 15 seconds or so...

---

Enable option 20.2 in the remote starter as well.

---

i enabled 20.2, and when trying to remote start, it just keeps cranking and not starting.

---

Just reflashed it and now it works...thank you for your help, much appreciated

---

So my son is just now telling me that he can't open his trunk with remote when car is remote started.  Could you tell me the correct bypass settings and remote start settings?  Bypass A2 is off, and remote #34 is set to pulse 2.5 seconds currently.  Yellow/black wire is connected/spliced to green lift gate wire in vehicle.

---

The oem remote will not work to open the trunk when it is remote started. That is normal.

It will only work from an after market remote (rf kit). Thats what the options are for.

Best regards.

---

thanks for quick response..much appreciated.