Evo One Cannot Go Into Programming or Valet Mode

Question

My Evo One will not go into programming or valet mode for me to program the RF642W remotes.  The key bypass is programmed, but that is the only thing that the unit will do.  Is there a way to check if the remote starter side is functionally where I can get the parking lights to flash or the horn to honk?

Answer 1

When applying power to the module, the red led that is in the same hole has the yellow loop will flash for a split second, ensuring there is power to the remote starter.

Make sure your ground is good.

Make sure you have connected the thick pink wire to the vehicle ignition, if the module doesn't see ignition it will not go into programming or valet.

Comments

Thanks Mathieu, I found out there was an issue with the parking lights, but it's now fixed and working.