Questions & Answers

Installed Evo-All with Crimestopper on 2008 Ford Mustang.

0 votes
I installed the Evo-All on my 2008 Ford Mustang with a Crimestopper remote start. Made it through programming and Dcryptor seemed to program but lock/unlock does not work and remote start only works with key close to ignition. All the LEDs appeared to flash correctly during install and unit is flashed for my car with the latest firmware. Also, as stated Dcryptor seemed to program correctly. Not sure what's wrong.

Thanks for any help!
asked Nov 13, 2019 in Ford by William Shea (160 points)

1 Answer

0 votes
What is the service nubmer to the module?

 

Are you using the data-link?
answered Nov 14, 2019 by derek g (324,940 points)
Yes the Evo-All is connected via data link to a Crimestopper Cool Start RS7-G5. The Serial number of the Evo is 001A07 048827.
Turn off D1 and D2 as well as H2 and option H.

Turn on option F2.

Save the options and then re test.
Will do!
After changing the options you suggested it now will not even attempt a start. Also no lock or unlock.
F1 if the starter is set Fortin/SL datalink.

F2 if the starter is set to ADS datalink
So that's gotten me further along for sure. I can see now that the remote starter is talking to the Evo (l (LEDs flashing). Also the flashing immobilizer indicator on the dash has disappeared. It tries to start the vehicle, lights come on the dash but doesn't crank. Also no lock or unlock.
Is it manual transmission? If so, did you do the clutch bypass?
Hi Robb,

 

No, It’s an automatic. The only thing I didn’t wire was the parking light as it’s shown as optional on my vehicle. Possibly more insight, when I try to remote start the red LED comes on then the yellow led comes on. The dash also briefly indicates “Door Ajar”. I wired the door pin for RAP.

contact your reseller: http://ts.mypushcart.com/ticket

They will be able walk you through reseting and programming everything.

...