2014 Tundra will not remote start

Question

I have a 2014 Toyota Tundra. Tried installing the EVO ONE with the T Harness. after doing the wiring and programing the unit, the truck will the turn over. i am running on the latest verson 79.24 and 1.15. all the wiring seems to be correct, when ever i press the lock or unlock on the remote, just te blue light flasses on the EVO ONE. Any help would be appriciated.

Answer 1

try version 79.20 like they say in the manual... have issues with other version .  recheck can wires( inverted?)

Comments

I dont see version 79.20 in the flash link manager. All the wiring seems to be correct,

---

You want to use 79.24 but it's very much possible using the factory remote will not since it is not listed as a compatible feature. BUT, you are getting a blue led flash on lock presses, that's a good sign.

 

You need to enable 2 options for 3x Lock Start.

• Option 38.2 in the remote starter options
• Option C1 needs to be enabled in the bypass options

You also want to enable option 2.4 in the remote starter options since to change the default ignition outputs

---

Thank you Robert. I guess I had c1 disabled. Thanks again it works now