Questions & Answers

2018 F150 EVO-FORT2 Programming issues

0 votes
2018 F-150 STD-key w/ keyless. After inserting the second key, then removing it, the ignition turns on, then nothing else happens. The lights are solid red and yello. I've tried multiple firmwares but they all do the same. I've also verified my wiring.

 

I'm not sure if this matters but the module is an OMEVOALL. Omega branded.
posté Sept 8, 2018 dans la catégorie Ford par Brandon Cleary (1,250 points)

1 Réponse

+2 votes
 
Meilleure réponse
2 possible cause to this.

Verify the wiring of the light blue and light blue/black wire and make sure they are not reversed.

The vehicle could be locked, using the 1 key programming method would solve this issue.
répondu Sept 10, 2018 par Mathieu Bertrand Collin2 (62,060 points)
élue Sept 17, 2018 par Brandon Cleary
Where do I find the one key programming method?
commenté Sept 10, 2018 par Brandon Cleary (1,250 points)
This would be the 1 key method, but it is a different installation. If you follow this one you will need to remove your thar-fort2: http://cdn02.fortin.ca/download/66021/evo-all_ig_sal_bi_for-f150-mkc_2015-2017_b_66021.pdf

Or you can follow option 2 Mathieu provided by having unlimited key programming enabled in the BCM if you want to utilize the fort2 harness.
commenté Sept 11, 2018 par derek g (347,230 points)
Ok thank you. I have Forscan so I'll inform the customer of the options and go from there. I will keep you updated and maybe this should be something noted for others. I know my wiring is correct as I've double and triple checked.
commenté Sept 11, 2018 par Brandon Cleary (1,250 points)
I changed the firmware to the correct one for 1 key programming. Didn't even change the wiring and got it to program first time. Thank you.
commenté Sept 17, 2018 par Brandon Cleary (1,250 points)

Questions associées:

...