Cant program '15 Kia Optima PTS

Question

I have everything wired on my '15 KIA Optima Push to Start. When i go to program i get to the step where i push the button 7 times. The red LED never flashes 10 times and the blue never comes on after.

When I hard wired CAN1 CAN2 wires, the wire diagram shows it connected to a wire in a harness in the driver side kick plate. But there are 2 wires in each pin in the harness. (2 white/orange wires, 2 white wires).  DO i have to splice to BOTH of the wires in each pin placement? Or will connected to only 1 work? This is the only thing i can thing of why i can not get mine to program.

Answer 1

you only need to connect to 1. 

 

If blue does not flash its because there is an issue with the can wires.