Questions & Answers

C1 & D2, where are these options ?

+1 vote
I am trying to do a full reset on an EVO-ONE, and I can't find where to do it.

In the Flash Link Manager, If I click option 23, it sets the options back to factory, and I click save, and it looks like that saves the settings, but I want to fully reset the unit.

I also see it says C1 and D2 are supposed to be enabled, but I can't find where these settings are in the software and the version written on the programming note that came with the unit says V79.24.

How do I know if that is right, and where do I find this info on the site ?

The software says Flash Link Manager 3.52

Is there another software that I need to use?

I am using a Crime Stopper Revo-1 and I have the setting for the factory remote set to off, since my car does not support that, but is there another option to set for using the after market antenna unit ?

Thanks
asked Mar 23, 2015 in Toyota by william simard (170 points)

1 Answer

0 votes

Required options for the Crimestopper REVO are outlined in this guide : EVO-ALL & Crimestopper

 

C1 and D1 are found in the bypass options and not the remote starter options. Those options though are for vehicles that have Can-bus connections. The 1999 Avalon, has no Can-Bus connections, so changing those options won't do anything.

 

The EVO-ONE is two units in one. An EVO-ALL and a remote starter. That being said, there are two sections in this unit that you can access, the remote starter and the bypass. To access anything remote starter related, it should say Connection Mode : Remote Starter on the bottom right of the flash-link screen, to access anything bypass related, the flash-link needs to be set to Connection Mode : Bypass. To toggle between both connection modes, you need to hit the TOGGLE button while the EVO-ONE is disconnected.

 

The Bypass options are for anything that can be controlled through Can-Bus (which is not applicated on this vehicle since there is no can-bus connections to begin with).

 

The remote starter options are used mostly for convenience features and set up depending on the vehicle.

 

option 23 will reset the remote starter options.

To reset the bypass options, and also clear any previous programming done you need to follow this procedure:

  1. Hold down programming button
  2. Plug in power
  3. Let go of button when led is RED
  4. re-apply button and hold it down until all three LEDs start to alternate.
  5. once they start to alternate again, the bypass side is reset
answered Mar 24, 2015 by Robert T (300,020 points)
Show 16 previous comments

We do not have anything listed for 1998 and lower Explorer. An EVO-ONE should work fine but I would recommend just getting a regular remote starter system such as the Crimestopper Cool Start or Pro Start series, http://crimestopper.com/products/remote-start/cool-start.html

My only real argument to that would be like trying to install windows 8.1 on a computer from 2001 with 16mb RAM. EVO-ONE is perfect solution for modern vehicles with data and can-bus networks

 

edited: changed F150 to Explorer typo

commented Mar 25, 2015 by Robert T (300,020 points)
edited Mar 26, 2015 by Robert T
I have the replacement unit in, and it is working.  I have just the horn hooked up, and the brake, not going to hook up the lights, don't want to chance it.

The red LED comes on when I push the remote and that is the only LED that comes on, I guess that is normal.

It stays on while the car is running.

I put the dash back together.  Keeping my fingers crossed that it stays working.

It is not easy to get behind the dash where I installed this unit.

Not much space in a Toyota.

Thanks for all your help.

Bill
commented Mar 27, 2015 by william simard (170 points)
glad to hear that all is working!
commented Mar 30, 2015 by J M (64,060 points)
I sent back the original unit for replacement.  Went out today in the mail

 

When it arrives I will do the power only test to make sure it works, then I will keep it as a backup unit, maybe I will get another vehicle in the coming years and be able to use it.

It is a really great unit.  I am going to get one of the older units for my 1991 Ford.

I installed keyless entry into it when I first got it, so I am going to try and find a unit that has keylees and remote start, so I don't have 2 remotes to carry.

 

Thanks again

 

Bill
commented Mar 30, 2015 by william simard (170 points)

I installed keyless entry into it when I first got it, so I am going to try and find a unit that has keylees and remote start, so I don't have 2 remotes to carry.

Most remote starter units will have keyless along with it. It shouldn't be a problem to find.

commented Mar 30, 2015 by Robert T (300,020 points)

Related questions

...