2019 Hyundai Veloster no clutch wiring diagram

Question

There is a 4 pin plug at the clutch, 2 of them look black and the other one is red and other is white. Which one do I need to tap into and what wire do I use on the evo all 20 pin connector?

Answer 1

most veloster do not require a clutch bypass. Try without.

Don't forget to set ready mode first. https://fortin.ca/en/download/87611/87611.pdf

Comments

So I am using the T-Harness with the Evo-One. Is there anything else that I would need to wire up?

---

Any help would be good! Install the evo one with the T harness and still not working.

---

Are you able to activate ready mode ?

Which Tharness?

What is the 12 digit service number of the module ?

---

So I used the T-Harness Thar-one-khy8 with the Evo-One and it was all plug and plug for the exception of one wire that will bypass the clutch, The main 6 pin harness that plugs into the Evo-One, the yellow wire also connects to the 12v + starter switch wire under the fuse box under the hood. Then every thing works. Nick the tech from Fortin helped me out. He did an awesome job! Great customer service!! Now I have it installed and happy!